Hose Protectors

DON'T BE FOOLED BY CHEAP IMITATIONS

EPHA Hose Protectors are durable wear shields made of an abrasion and hydrocarbon resistant material that is impervious to solvents, oils, grease, and gasoline. In addition, the Hose Protector has an extremely high wear factor, as well as a wide range of operating temperatures (-40 to 400 F) that allows it to protect your equipment in even the harshest of conditions.

HP4* (2.50”W x 4.00”L)4” Counter Display Box (50) 4” Hose Protectors w/ Ties
HP6*(3.25”W x 6.00”L) 6” Counter Display Box(50) 6” Hose Protectors w/ Ties
HP8* (3.50”W x 8.00”L) 8“ Counter Display Box (50) 8” Hose Protectors w/ Ties
HP10* (4.50”W x 10.00”L) 10” Counter Display Box (15) 10” Hose Protectors w/ Ties
HP12* (5.00”W x 12.00”L) 12” Counter Display Box(15) 12” Hose Protectors w/ Ties
HPM*-60 (Mixed Assortment)Mixed Counter Display Box (20) 4”, (20) 6”, & (20) 8” w/ Ties

*Insert B for Black, O for Orange, or Y for Yellow when ordering

Protection For:

  • Hydraulic Lines
  • Battery Cables
  • Wiring Harnesses
  • Brake Systems
  • Oil & Fuel Lines
  • Radiator Hoses

Industry Versatility:

  • Manufacturing
  • Trucking & Fleet Maintenance
  • Industrial/MRO’s
  • Mining & Construction
  • Public Transportation
  • DOT’s/Waste Management
EASY INSTALLATION IN MINUTES

Installing a Hose Protector while building a new hose, or installing a replacement hose shield in the exact point of abrasion from wears when re-attached. This versatility allows for a fast, simple, and effective solution for abrasion problems. EPHA Hose Protectors are easily installed without having to disassemble lines or break hydraulic systems apart – allowing for spot application in four quick and easy steps.

  1. Locate the suspected problem area on hose.
  2. Place the Hose Protector over the problem area.
  3. Install cable ties, pulling tight with pliers.
  4. Cut off the excess length of the ties and the hose is now safely shielded from wear.